Subcontratación de Mecanizado
Si usted piensa que Atritor podría ser capaz de satisfacer sus necesidades de mecanizado, o si usted quisiera discutir una solución a un problema, por favor ponerse en contacto y haremos todo lo posible para ayudarle.
Boring
Turning
Milling
Machining
Drilling
Grinding
Slotting
Sawing
Capstan, Turret and Centre Lathes
Herbert • Capstan Lathe, No. 5 pre-op chuck feed
| Bed size (mm) | 740 × 300 (29″ × 12″) |
| Workpiece size (mm) | 580 × Ø200 (23″ × Ø8″) |
| Surface finish (µm) | 1.6 (0,0001″) |
Herbert • Turret Lathe, No. 12B
| Bed size (mm) | 1540 × 530 (61″ × 21″) |
| Workpiece size (mm) | 1540 × Ø530 (61″ × Ø21″) |
| Best tolerance (mm) | 0.05 (0,002″) |
| Surface finish (µm) | 1.6 (0,0001″) |
Dean Smith & Grace • Centre Lathe, Type 21
| Bed size (mm) | 2870 × 460 (113″ × 18″) |
| Workpiece size (mm) | 2260 × 330 (89″ × 13″) |
| Workpiece height (mm) | 580 (23″) |
| Workpiece mass (kg) | 2000 (4410 lb) |
| Best tolerance (mm) | 0.025 (0,001″) |
| Surface finish (µm) | 1.6 (0,0001″) |
Herbert • Capstan Lathe, No. 5 pre-op bar feed
| Bed size (mm) | 400 × 220 (16″ × 9″) |
| Workpiece size (mm) | 400 × Ø103 (16″ × Ø4″) |
| Workpiece height (mm) | 21 (1″) |
| Best tolerance (mm) | 0.05 (0,002″) |
| Surface finish (µm) | 1.6 (0,0001″) |
Herbert • Capstan Lathe, No. 2 Bar Feed
| Bed size (mm) | 260 × 180 (10″ × 7″) |
| Workpiece size (mm) | 260 × Ø40 (10″ × Ø2″) |
| Best tolerance (mm) | 0.25 (0,0098″) |
| Surface finish (µm) | 1.6 (0,0001″) |
