The PMT range of Jet Mills & Classifiers
Jetmills:
Up to 30% less specific energy consumption compared to common Jetmill systems
Increase of the grinding efficiency due to the closed grinding and classifying loop, which leads to a higher output and reduced specific energy costs
Grinding gas either high pressure air (3.5 to 15 bar) or overheated steam (up to 24 bar at 400ºC) from 500 to 6000Nm³/h
Easy adjustment of fineness by regulation of motor rpm and excellent top size reduction of the final product:
Standard SJ 50 - CR65 : Top cut of product down to 7µm
Standard SJ 50 - CR/ER 100 : Top cut of product down to 3µm
PMT - Single Jetmill Systems:
JETMILL - TYPE
SJ15-CR/ER100
SJ50-ER100
SJ50-ER65
Fineness d97 (µm)
3 - 45
3 - 45
7 - 60
Fineness d50 (µm)
0.5 - 10
0.5 - 10
1 - 15
Air Volume (m3/h)
800 - 1200
2400 - 3600
2400 - 3600
Classifier Type
2 / 260
5 / 260
5 / 260
Capacity Factor
1
4
4
Capacity (industrial minerals) (kg/h)
50 - 1000
200 - 4000
400 - 4000
PMT - Twin Jetmill Systems:
JETMILL - TYPE
SJ100 - ER100
SJ100 - CR65
Fineness d97 (µm)
3 - 45
7 - 60
Fineness d50 (µm)
0.5 - 10
1 - 15
Air Volume (m3/h)
4500 - 7500
4500 - 7500
Classifier Type
2x5 / 260
2x5 / 260
Capacity Factor
8
8
Capacity (industrial minerals) (kg/h)
400 - 8000
800 - 8000
Classifier:
Overpressure operation for optimization of particle dispersion
Increased fines recovery efficiency resulting from high shear force classifier
Unique design patented classifier
Up to 190m/s circumferential speed producing d50 sub-micron range
Easy adjustment of product fineness and product feed
PMT - Classifier Systems JS:
CLASSIFIER
JS75 - VR120
JS150 - VR120
Fineness d97 (µm)
2 - 25
2 - 25
Fineness d50 (µm)
0.3 - 5
0.3 - 5
Air Volume (m3/h)
4000 - 6000
8000 - 12000
Classifier Type
260 / 5
2 x 260 / 5
For more information or to discuss an application
contact
Technical Sales at Atritor.
<- Go back to previous page
